Product Videos
Questions & Answers
Is the 1" axle nut you have a 14TPI?
Willys Jeep Parts Tech:
I do believe so but will need to check.
I do believe so but will need to check.
What is the thread size on the axle and this nut?
Willys Jeep Parts Tech:
1" thread.
1" thread.
What size Socket is needed to remove and replace this bolt?
Willys Jeep Parts Tech:
I believe 1-3/8" socket.
I believe 1-3/8" socket.
What is the inside diameter of this axel nut? The of on my axel is .983 on the top of the threads
Willys Jeep Parts Tech:
These go on a 1" axle shaft like original. You measure the valleys when getting the size of a nut.
These go on a 1" axle shaft like original. You measure the valleys when getting the size of a nut.
Do you carry the washers that go behind the axle nut?
Willys Tech:
That is a local hardware store item.
That is a local hardware store item.
Is there a washer behind the axle nut?
Willys Tech:
Yes originally there was.
Yes originally there was.
torque on these nuts is 150lb.cotter pin does not always line up with holes on axel and nut.tighter-looser?
Willys Tech:
You just need to restart the nut in a different location till you get it to line up.
You just need to restart the nut in a different location till you get it to line up.
are these reversed thread?
Willys Tech:
No, this is a standard thread like original. The lug bolts on early jeeps are reverse, not the axle shaft nut.
No, this is a standard thread like original. The lug bolts on early jeeps are reverse, not the axle shaft nut.
YOU MIGHT ALSO BE INTERESTED IN
