Rear Axle Shaft Puller
Fits 41-71 Jeep & Willys
Rear Axle Shaft Puller
This tool is used to remove the tapered rear axle shaft, axle bearing cone and axle bearing cup as an assembly with a heavy duty steel drum and heavy duty nuts and washers to slowly pull the axle shaft from the axle housing.
This kit comes complete with the steel drum, 1", 7/8" and 3/4" axle nuts, 1", 7/8" and 3/4" grade 8 thick flat washers and grade 8 spacer bolts and nuts.
Once the rear wheel brake parts, brake backing plate and axle shaft bearing retainer have been removed, the drum is slipped over the axle shaft and seated against the axle housing flange. The thick, wide flat washer is installed along with the axle nut and with the use of the correct wrench, the nut is tightened. Usually the axle shaft, bearing cone and cup will pull out with just a few turns of the axle nut.
Application:
All rear axles - Dana 23, 27, 41, 44, 53 and Timken
Fits:
41-45 MB
41-45 GPW
46-49 CJ-2A
49-53 CJ-3A
53-64 CJ-3B
55-71 CJ-5
50-52 M38
52-66 M38A1
46-64 Truck
46-64 Station Wagon
48-51 Jeepster
Note:
Tougher jobs may require the use of a second flat washer or even the use of the three spacer bolts and nuts installed in the axle housing flange.
Part # | Price |
---|---|
C637 | $114.99 MSRP: |
$114.99
MSRP:
Questions & Answers
Will this puller also work with a Dana 30 tapered axle? My vehicle is a '67 Jeepster convertible
I believe the thread count is the same.
Is there a video showing how to use this tool? Thank you
It basically just threads on. Email Jason@kaiserwillys.com to help.
How do you keep the axle shaft from spinning while you are tightening the axle nut.
It puts enough pressure to keep from spinning. It doesn't take very many turns to get it to pop out anyway.
YOU MIGHT ALSO BE INTERESTED IN

New Rear Axle Outer Grease Protector (2 required)
Fits 46-71 Jeep & Willys with Dana 41/44/53
Part # 640889
$27.99
MSRP:

NOS Differential Carrier Case with Fine Spline Spider Gears (19 Splines)
Fits 49-71 Jeep & Willys with Dana 44
Part # 935640
$399.99
MSRP:

Pinion Shaft Yoke
Fits 41-71 Jeep & Willys w/ Dana 25 Front & 27/41/44 Rear
Part # A1445
$87.99
MSRP:

Rear Axle Outer Oil Seal w/Gasket
Fits 46-71 Jeep & Willys with Dana 41/44/53
Part # 914802
$8.49
MSRP:

Differential Carrier Bearing Shim Pack
Fits 41-71 Jeep & Willys with Dana 23/25/27/41/44
Part # 648061
$32.99
MSRP:

Differential Spider Gear Set
Fits 46-71 Jeep & Willys with Dana 41/44 in 10 spline
Part # 802260
$189.99
MSRP:

New Rear Axle Outer Grease Protector (2 required)
Fits 46-71 Jeep & Willys with Dana 41/44/53
Part # 640889
$27.99
MSRP:

NOS Differential Carrier Case with Fine Spline Spider Gears (19 Splines)
Fits 49-71 Jeep & Willys with Dana 44
Part # 935640
$399.99
MSRP:

Pinion Shaft Yoke
Fits 41-71 Jeep & Willys w/ Dana 25 Front & 27/41/44 Rear
Part # A1445
$87.99
MSRP:

Rear Axle Outer Oil Seal w/Gasket
Fits 46-71 Jeep & Willys with Dana 41/44/53
Part # 914802
$8.49
MSRP:

Differential Carrier Bearing Shim Pack
Fits 41-71 Jeep & Willys with Dana 23/25/27/41/44
Part # 648061
$32.99
MSRP:

Differential Spider Gear Set
Fits 46-71 Jeep & Willys with Dana 41/44 in 10 spline
Part # 802260
$189.99
MSRP:

New Rear Axle Outer Grease Protector (2 required)
Fits 46-71 Jeep & Willys with Dana 41/44/53
Part # 640889
$27.99
MSRP:

NOS Differential Carrier Case with Fine Spline Spider Gears (19 Splines)
Fits 49-71 Jeep & Willys with Dana 44
Part # 935640
$399.99
MSRP:

Pinion Shaft Yoke
Fits 41-71 Jeep & Willys w/ Dana 25 Front & 27/41/44 Rear
Part # A1445
$87.99
MSRP:

Rear Axle Outer Oil Seal w/Gasket
Fits 46-71 Jeep & Willys with Dana 41/44/53
Part # 914802
$8.49
MSRP: