Product Videos
Questions & Answers
Sort By:
Questions: Is it possible to roll this speedometer forward so it reads the mileage on the original speedo? I know tat theoretically drops the value, but my mileage is already low and I am not worried about it.
Question By: Fritz Glaser on Sep 30 2022 1:07 AM
Not sure if you could do it from inside the unit, but the alternative method would be to hook up the speedometer cable and then use a drill on the other end and go until you get to that mileage.
Answer By: Willys Jeep Parts Tech on Sep 29 2022 7:55 PM
Questions: Will this work in a 1958 jeep fc170 with a 22 gallon tank
Question By: Dan on May 6 2022 5:36 PM
Yes, as long as you have the 5.5" opening and are 12volt.
Answer By: Willys Jeep Parts Tech on May 9 2022 7:17 AM
Questions: Do you have a rev counter the same diameter please
Question By: Ian Dawes on Jan 17 2022 7:13 PM
Sorry, they never originally used one.
Answer By: Willys Jeep Parts Tech on Jan 18 2022 5:33 AM
Questions: i have a 62 cj5 put my new speedometer in and the fuel gage shots up to full. sender worked before .am i missing something
thanks Bill
Question By: bill stofanak on Dec 30 2021 5:25 PM
I would check your ground wires and test your sending unit with a OHM's reader.
Answer By: Willys Jeep Parts Tech on Jan 3 2022 5:45 AM
Questions: Can the odometer be reset to shpw accurate mileage?
Question By: GLSWINEHART on Oct 30 2021 5:15 AM
Some people use a drill motor but depending on mileage this may not be practical.
Answer By: Willys Jeep Parts Tech on Nov 1 2021 5:46 AM
Questions: Did you have the socket for the light to the speedometr
Question By: John Nielsen on Aug 23 2021 6:24 PM
A6225 and A2506
Answer By: Willys Jeep Parts Tech on Aug 23 2021 12:40 PM
Questions: If i purchase a new Tub do I cut a 5.5 inch hole?
Question By: hollis Dyer on Jul 21 2021 9:14 PM
Yes, but it is always best to wait to have the gauge before you cut a hole.
Answer By: Willys Jeep Parts Tech on Jul 22 2021 5:58 AM
Questions: Another site list the 914845 with **NEW STEPPER MOTOR DESIGN**. Is yours the same?
Question By: Garry Yake on Nov 23 2020 8:16 PM
There is only one manufacture on these that makes it currently and i dont know what they mean by that.
Answer By: Willys Jeep Parts Tech on Nov 23 2020 12:32 PM
Questions: My speedometer cluster just ate itself sounded like screaming eagles inside the poor thing. Wondering how well these are made and if you hear of any issues with them? I have a new speedometer cable and looking for some feedback on this instrument before I purchase one
1958 CJ5
Thanks
Jim
Question By: Jim Moore on Jun 6 2020 7:15 PM
We dont have any issues with ours. Please email mike@kaiserwillys.com to help.
Answer By: Willys Jeep Parts Tech on Jun 8 2020 5:46 AM
Questions: Will this be compatible whit my Dj3a T96 transmission?
Question By: alastair mccaskell on May 5 2020 11:31 AM
Please email mike@kaiserwillys.com a picture of your current speedometer and we can help out.
Answer By: Willys Jeep Parts Tech on May 5 2020 5:52 AM
Questions: Will this work for a 1974 CJ5?
Question By: Matthew Mercer on Apr 21 2020 12:06 AM
Yes, that is correct.
Answer By: Willys Jeep Parts Tech on Apr 21 2020 5:54 AM
Questions: I have a 1957 FC-150 in 12 volt. I also have an aftermarket fuel tank in the bed. I want to add a sending unit to this tank. Do you know what the ohms range is for the fuel gage in this speedo cluster? I want to get a sender that matches up.
Question By: Hank on Nov 5 2019 9:50 PM
8-1/2 - 10-1/2" FULL
70-80 EMPTY
Answer By: Willys Jeep Parts Tech on Nov 5 2019 1:52 PM
Questions: Will this work for my 57 FC 150?
Question By: Joseph Avvampato on Jul 3 2019 6:45 PM
Yes, as long as you have the same style 5.5" diameter speedometer cluster.
Answer By: Willys Jeep Parts Tech on Jul 8 2019 5:40 AM
Questions: What is the diameter of the speedometer cluster. I want to make sure it will fit in to replace the one I have now. Also should I order a cable or any other parts to go with this. I have a 1970 CJ-5 Thank you
Question By: Connie Rippel on Nov 12 2018 10:14 PM
5.5" in diameter
Answer By: Willys Jeep Parts Tech on Nov 13 2018 5:36 AM
Questions: Hi I just installed this gauge in my 68 CJ 5 with the v6. Everything works, but the speedometer is off by quite a bit. It doesn't move up from zero until my GPS says I'm going 20mph. When it says I'm going 10 mph I'm actually going about 30 mph. Does it require a different gear in transfer case? It worked fine with the old speedo before the gauge died? Did I not install it properly? Thanks!
Question By: Nick Lyons on Oct 9 2018 11:28 PM
Please email mike@kaiserwillys.com. Do you have the original size tires and rims on there?
Answer By: Willys Jeep Parts Tech on Oct 10 2018 5:43 AM
Questions: (914845) Does this unit have the built in voltage regulator, or are the gauges 12V connecting directly to the sender?
Question By: Richard H King on Sep 2 2018 4:12 PM
This is a resistance reader only. You wire direct to gauge.
Answer By: Willys Jeep Parts Tech on Sep 4 2018 1:38 PM
Questions: Is the face of it glass or plastic?
Question By: Ian on Aug 23 2018 1:41 AM
Glass
Answer By: Willys Jeep Parts Tech on Aug 23 2018 5:32 AM
Questions: hi its posible to get one for 6 volts???
Question By: Carlos Torres on Jul 20 2018 10:59 PM
This speedometer is only available in 12 Volts but we may have some other options for you. Give us a call toll free and we can go over it - 888.648.4923. Thanks
Answer By: Willys Jeep Parts Tech on Jul 23 2018 5:36 AM
Questions: Is this Speedo back lite? Does it come with all needed indicator bulbs?
Question By: Aaron Schmidt on Aug 9 2017 8:06 PM
If you're looking for the complete kit with bulbs and sockets, try part #999845. Thanks
Answer By: Willys Jeep Parts Tech on Aug 10 2017 5:37 AM
Questions: does this fit a 75 cj5? and have some of the issues that are others are having been resolved?
Question By: eric sandlin on Jun 28 2017 3:09 PM
If you have a 5.5" hole it will.
Answer By: Willys Jeep Parts Tech on Jun 28 2017 8:52 AM
Questions: I bought this gauge set about a year and a half ago. Just recently installed it. Temp always reads hot when warmed up. I am using an Echlin TS6464. sender. Starts out cold then as engine gets to temp it always reads hot. Old gauge always read about mid-way on gauge when at temp.
Question By: Bob Sweet on Jun 28 2017 3:01 AM
Please call us toll free and we can try to help you out. This time of year you could just be running hot too.
Answer By: Willys Jeep Parts Tech on Jun 28 2017 6:01 AM
Questions: my 59 cj5 does not have turn signal in the gauge. I notice one does is there one without? or doe I have to buy 2 light sockets as well ad do some rewiring?
Question By: Keith Eskow on Feb 23 2017 12:05 AM
The only way they make the gauges now is with the green indicator in the face of it.
Answer By: Willys Jeep Parts Tech on Feb 23 2017 5:58 AM
Questions: hi, i have a CJ5.
does the speedometer includes the cables needed to work ?
Question By: sebastian A moreta on Jul 21 2016 2:52 PM
643797 is the number for the speedometer cable. It is a separate item.
Answer By: Willys Jeep parts tech on Jul 21 2016 8:29 AM
Questions: In your discrption it says ( oil & amp. Cutouts) does this mean that I use existing wire and lights ? I have 1967. cj 6a
Question By: Jim on Sep 17 2012 12:00 AM
This is a complete cluster with gauges. You just hook up your wires and lights from your harness and you are off and running.
Answer By: Willys Tech on Sep 18 2012 12:00 AM
Questions: Does this come with a wiring diagram?
Question By: Anonymous on Jul 6 2012 12:00 AM
Yes it does.
Answer By: Willys Tech on Jul 9 2012 12:00 AM
Questions: I need a speedometer for my 1963 CJ3B. This looks like it but it's says it fits a 55-71 CJ-5. The one that is pictured for mine doesn't look like the one I have. Smaller with no gauges.
Question By: Steve Olson on Apr 6 2012 12:00 AM
Later CJ-3B did use this style speedometer. So this will be the correct.
Answer By: Willys Tech on Apr 6 2012 12:00 AM
Questions: I recently purchased a replacement cluster from another company (my mistake) and neither the fuel nor temp gauges will work with the factory sending unit or the new sending unit I purchased from you guys. Will this cluster work in my 62 CJ5 and be compatible with the original fuel sending unit and temp sensor?
Question By: Anonymous on Dec 30 2011 12:00 AM
Yes this cluster works with the factory gauges. They are mated to one another.
Answer By: Willys Tech on Jan 2 2012 12:00 AM
Questions: What is the difference between 914845 and 914845A? Looking for 5.5 set for CJ3B.
Question By: Anonymous on Nov 13 2011 12:00 AM
They are the same just an interchange number.
Answer By: Willys Tech on Nov 14 2011 12:00 AM
Questions: my 60 cj5 has the original stewart warner speedo it looks why differnt then this one this one looks like one for 1970s era jeep do have the original stye stewart warner with single numbers thanks
Question By: colin on Sep 1 2011 12:00 AM
The single digit speedo's are not available anymore. This is the replacement.
Answer By: Willys Tech on Sep 6 2011 12:00 AM
Questions: Will this speedo work on my 62 FC170 ?
Question By: Anonymous on Jun 20 2011 12:00 AM
Yes it should work just fine.
Answer By: Willys Tech on Jun 21 2011 12:00 AM
Questions: Can I use this gauge in a '61 CJ3B?
Question By: Dustin on May 27 2011 12:00 AM
Yes it should work fine.
Answer By: Willys Tech on May 31 2011 12:00 AM
Questions: I have a 6 volt system in a 54 DJ and I need the speedometer and guages for 6 volts. What do I need to make it work?
Question By: Al Appel on Feb 14 2011 12:00 AM
Please call us toll free. We have a few options.
Answer By: Willys Tech on Feb 15 2011 12:00 AM
Questions: Does this require a seperate voltage regulator for the fuel and temp gauge or do you just plug the 12 volt wire straight on?
Question By: Geoff on Jan 1 1970 12:00 AM
No, it wires straight up.
Answer By: Willys Tech on Jan 14 2011 12:00 AM
Questions: What is the difference between the CJ speedo's and the trucks?
Question By: Anthony on Jun 2 2013 12:00 AM
There is no difference. They are the same.
Answer By: Willys Tech on Jun 3 2013 12:00 AM
Questions: Will this work for a DJ3a ?
Question By: Carlos on Feb 5 2013 12:00 AM
As long as you have this style cluster in your dash then yes it wil.
Answer By: Willys Tech on Feb 5 2013 12:00 AM
Questions: i have already ordered this cluster but need to order the temp sending unit that screws into the engine block. in the catalog it shows two saying one is for king sealy and one is for warner. which one do i order to go with this cluster? thanks you guys are great!
Question By: dean reece on Jan 3 2013 12:00 AM
914847 is the one you want
Answer By: Willys Tech on Jan 3 2013 12:00 AM
You Might Also Be Interested In
Weekly Willys highlights and discounts sent to your inbox
